This is a slide-able tube furnace with 3inch ID×55inch L quartz and flanges and a maximum working temperature up to 1200C.One pair of sliding rails is installed on the bottom of the furnace to allowsliding the furnace from one side to another to achieve max.heating and cooling rates up to cooling,the furnace can be slide to another side after sample heating is completed.Moreover,the heating and cooling rates may reach 15C/s under vacuum or inert gasses.This furnace provides an alternative for rapid thermal processing at the lowest cost.
This is a slide-able tube furnace with 3inch ID×55inch L quartz and flanges and a maximum working temperature up to 1200C.One pair of sliding rails is installed on the bottom of the furnace to allowsliding the furnace from one side to another to achieve max.heating and cooling rates up to cooling,the furnace can be slide to another side after sample heating is completed.Moreover,the heating and cooling rates may reach 15C/s under vacuum or inert gasses.This furnace provides an alternative for rapid thermal processing at the lowest cost.
Specifications
Furnace Structure | Double-layer steel structure with dual air cooling fans. One pair of sliding rails are installed on the bottom of the furnace,which allows the furnace to be manually moved from side to side. Vacuum flanges and a digital vacuum gauge are installed for immediate use. Sliding rail length is about 1200mm,the furnace can slide 600mm distance. |
Power | 2.5KW |
Voltage | AC 208-240V Single Phase 50/60Hz |
Max.Temperature | 1200℃（＜1 hour） |
Continuous Tem. | 1100℃ |
Heating Elements | Fe-Cr-AI Alloy doped by Mo |
Processing Tube | High purity fused quartz tube 80mm*75mm*1400mm Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring. |
Temperature Controller | PID automatic control with 30 programmable segments with +/-1℃ accuracy. Built-in over-temperature alarm and programmable allows for operation without an attendant. Two K-type thermal couples are included.One is built in the furnace to control furnace temperature,and another inserted into the tube to monitor sample real temperature profile. |
Vacuum Flanges | Stainless steel vacuum flanges are installed on both ends of the tube with heavy duty support. |
Vacuum Level | Limited by the pump. |
Dimensions | 1500*380*620mm(L*W*H) |
Net Weight | ~100Kg |
Warranty | One-year limited manufacturer’s warranty.Consumable parts such as processing tubes,O-rings and heating elements are not covered by the warranty. |
Note:Please contact us if you have any questions.
This is a slide-able tube furnace with 3inch ID×55inch L quartz and flanges and a maximum working temperature up to 1200C.One pair of sliding rails is installed on the bottom of the furnace to allowsliding the furnace from one side to another to achieve max.heating and cooling rates up to cooling,the furnace can be slide to another side after sample heating is completed.Moreover,the heating and cooling rates may reach 15C/s under vacuum or inert gasses.This furnace provides an alternative for rapid thermal processing at the lowest cost.
Specifications
Furnace Structure | Double-layer steel structure with dual air cooling fans. One pair of sliding rails are installed on the bottom of the furnace,which allows the furnace to be manually moved from side to side. Vacuum flanges and a digital vacuum gauge are installed for immediate use. Sliding rail length is about 1200mm,the furnace can slide 600mm distance. |
Power | 2.5KW |
Voltage | AC 208-240V Single Phase 50/60Hz |
Max.Temperature | 1200℃（＜1 hour） |
Continuous Tem. | 1100℃ |
Heating Elements | Fe-Cr-AI Alloy doped by Mo |
Processing Tube | High purity fused quartz tube 80mm*75mm*1400mm Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring. |
Temperature Controller | PID automatic control with 30 programmable segments with +/-1℃ accuracy. Built-in over-temperature alarm and programmable allows for operation without an attendant. Two K-type thermal couples are included.One is built in the furnace to control furnace temperature,and another inserted into the tube to monitor sample real temperature profile. |
Vacuum Flanges | Stainless steel vacuum flanges are installed on both ends of the tube with heavy duty support. |
Vacuum Level | Limited by the pump. |
Dimensions | 1500*380*620mm(L*W*H) |
Net Weight | ~100Kg |
Warranty | One-year limited manufacturer’s warranty.Consumable parts such as processing tubes,O-rings and heating elements are not covered by the warranty. |
Note:Please contact us if you have any questions.
