HT-VMF is a vacuum melting & casting furnace with stirring & secondary charge function that is capable of melting/casting various metal alloys up to 1000g at Max. 1200ºC. It is an excellent furnace for preparing various light metallic alloys, such as, Li, Al, Mg alloys, thermal electronics alloys, and phase transformation energy storage. This furnace is also excellent for preparing alloys of lithium anode.
SPECIFICATIONS:
Power Requirements | Power: 208 - 240 VAC, Single phase Max. 3500 power consumption A 10-foot power cable is included without a power plug |
Vacuum chamber | l The vacuum chamber is made of stainless steel l Vacuum Chamber: Ø315 mm × 315 mm H (inner dimension) l One Ø120 mm quartz observation window. l Built-in a rocker arm to rotate the crucible and cast into a water-cooled copper or a refractory mold. l One KF25 and one KF40 vacuum port are built at the back of the chamber. l DN160 ISO-K port is built on the left of the chamber for connection of a turbopump l Two KF16 and a KF25 port on the top of the chamber for a vacuum meter or other device. l The mechanical stirring function is built in for uniform alloying. l The secondary material feeder is included, which can feed 3 types of volatile dopants into the crucible during melting under vacuum. |
Crucible & Casting Mold | l Two graphite crucibles are included ² Graphite crucible 1: Ø47 OD × Ø35 ID × 88 H mm; working volume ~70 ml (up to 400g Fe alloy) ² Graphite crucible 2: Ø75 OD × Ø60 ID × 105 H mm; working volume ~250 ml (up to 1200g Fe alloy) l Optional BN liners for graphite crucible are also available. ² BN liner for crucible 1: Ø34 OD × Ø28 ID × 80 H mm ² BN liner for crucible 2: Ø58 OD × Ø50 ID × 100 H mm l An optional copper casting mold is also available. |
Heating & Temperature controller | l NiCrAl resistance coil as the heater up to 1200ºC l Precise 30-segment programmable temperature controller l PID and Autotune as well as overheating protection l +/- 1ºC accuracy l K-Type thermal couple |
Pressure Gauge & Flow meter | l Corrosion-proof Capacitance Diaphragm Gauge with ceramic coated sensor head is included with a wide measure range (3E-5 ~ 1013 torr) l One 0.2 - 2 L/min float flow meter is included. |
Vacuum and Pressure | l Chamber vacuum: ² 10E-2 torr within 60 minutes via a mechanical pump ² 2E-5 torr overnight pumping via a 67L/s turbopump ² 1E-6 torr via a 260 L/s turbopump. l For the vacuum, please click the picture below to order a pump separately l Max. positive inert gas pressure: 2 bar |
Warranty: | l One-year limited warranty with lifetime support |
SPECIFICATIONS:
Power Requirements | Power: 208 - 240 VAC, Single phase Max. 3500 power consumption A 10-foot power cable is included without a power plug |
Vacuum chamber | l The vacuum chamber is made of stainless steel l Vacuum Chamber: Ø315 mm × 315 mm H (inner dimension) l One Ø120 mm quartz observation window. l Built-in a rocker arm to rotate the crucible and cast into a water-cooled copper or a refractory mold. l One KF25 and one KF40 vacuum port are built at the back of the chamber. l DN160 ISO-K port is built on the left of the chamber for connection of a turbopump l Two KF16 and a KF25 port on the top of the chamber for a vacuum meter or other device. l The mechanical stirring function is built in for uniform alloying. l The secondary material feeder is included, which can feed 3 types of volatile dopants into the crucible during melting under vacuum. |
Crucible & Casting Mold | l Two graphite crucibles are included ² Graphite crucible 1: Ø47 OD × Ø35 ID × 88 H mm; working volume ~70 ml (up to 400g Fe alloy) ² Graphite crucible 2: Ø75 OD × Ø60 ID × 105 H mm; working volume ~250 ml (up to 1200g Fe alloy) l Optional BN liners for graphite crucible are also available. ² BN liner for crucible 1: Ø34 OD × Ø28 ID × 80 H mm ² BN liner for crucible 2: Ø58 OD × Ø50 ID × 100 H mm l An optional copper casting mold is also available. |
Heating & Temperature controller | l NiCrAl resistance coil as the heater up to 1200ºC l Precise 30-segment programmable temperature controller l PID and Autotune as well as overheating protection l +/- 1ºC accuracy l K-Type thermal couple |
Pressure Gauge & Flow meter | l Corrosion-proof Capacitance Diaphragm Gauge with ceramic coated sensor head is included with a wide measure range (3E-5 ~ 1013 torr) l One 0.2 - 2 L/min float flow meter is included. |
Vacuum and Pressure | l Chamber vacuum: ² 10E-2 torr within 60 minutes via a mechanical pump ² 2E-5 torr overnight pumping via a 67L/s turbopump ² 1E-6 torr via a 260 L/s turbopump. l For the vacuum, please click the picture below to order a pump separately l Max. positive inert gas pressure: 2 bar |
Warranty: | l One-year limited warranty with lifetime support |
