HT-1350C is a compact high-temperature tensile strength tester via a small punch method, which can test the high-temperature mechanical strength of materials up to 1350°C via a small disc ( 8 mm dia ) quickly and economically.
HT-1350C is a compact high-temperature tensile strength tester via a small punch method, which can test the high-temperature mechanical strength of materials up to 1350°C via a small disc ( 8 mm dia ) quickly and economically.
SPECIFICATIONS:
Power | l AC 208-240V Single Phase, 50/60 Hz l 2.5 KW l 15A air creaker is required l 10 ft power cable is included, but no power plug |
Furnace | l Compact and splittable tube furnace with Alumina fiber inner insulator and double-layer steel outer layer l Max. working temperature (continuous for 3 months) 1350°C l Temperature accuracy: +/- 0.1 °C (Euro-Therm controller available at extra cost) l The furnace is located in a vacuum chamber for atmosphere control. |
Punch Die Fixture & Sample | l The fixture ( die) is made of recrystallized SiC l The fixture consists of two parts and tightens by M18x2 l The sample to be tested: 8 mm dia. x 0.5 mm thickness, which is tightened in the middle of the die. |
Pushing Rod | l Pushing rod is made of Moly via precision machining l An alignment connector is installed with the pushing rod to ensure 2.5 mm dia. head in the center of the SiC die. |
Water Chiller | l HT recommends Digital Temperature Controlled Recirculating Water Chiller Or any equivalent water chiller of your own choice |
Heating Furnace & Vacuum Chamber | l Special MoSi2 heating elements are built in a split-able furnace with thermal insulation. l Mac. working Temperature l 1300°C continuously l 1350°C for < 1 hr l The heating furnace is fixed in the vacuum-sealed chamber with a hinged type door l Working gas: All types of inert gas and oxygen gas. l Max. Vacuum level: 10-2 torr by a mechanical pump and 10-5 torr by turbopump. |
Temperature Control | l Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection. l Over-temperature protection and alarm allow for operation without attendant(s). l +/- 1 ºC temperature accuracy. l Communications Port to connect a laptop with operation software. |
Fixture for Yield Strength | l The pressure is applied to the pushing rod via heavy-duty DC motor. l Constant loading speed is driven by a step motor with 2,000N Max. force l Loading speed: 0.02 to 60 mm/ minute adjustable l Load sensor accuracy： +/- 0.2 N l The displacement sensor is built-in with +/- 1-micron accuracy. |
Control Panel | l A laptop computer will be used as a control panel with software to program working temperature and pushing rod speed l One computer will control 4 sets of the machine. l Software is included, but the Laptop computer is optional at the extra cost. l The PC will display and record the force vs displacement for each sample at a set temperature. |
Warranty | l One-year limited warranty l (Consumable parts such as heating elements, SiC die, and pushing rod are not covered by the warranty ) |
HT-1350C is a compact high-temperature tensile strength tester via a small punch method, which can test the high-temperature mechanical strength of materials up to 1350°C via a small disc ( 8 mm dia ) quickly and economically.
SPECIFICATIONS:
Power | l AC 208-240V Single Phase, 50/60 Hz l 2.5 KW l 15A air creaker is required l 10 ft power cable is included, but no power plug |
Furnace | l Compact and splittable tube furnace with Alumina fiber inner insulator and double-layer steel outer layer l Max. working temperature (continuous for 3 months) 1350°C l Temperature accuracy: +/- 0.1 °C (Euro-Therm controller available at extra cost) l The furnace is located in a vacuum chamber for atmosphere control. |
Punch Die Fixture & Sample | l The fixture ( die) is made of recrystallized SiC l The fixture consists of two parts and tightens by M18x2 l The sample to be tested: 8 mm dia. x 0.5 mm thickness, which is tightened in the middle of the die. |
Pushing Rod | l Pushing rod is made of Moly via precision machining l An alignment connector is installed with the pushing rod to ensure 2.5 mm dia. head in the center of the SiC die. |
Water Chiller | l HT recommends Digital Temperature Controlled Recirculating Water Chiller Or any equivalent water chiller of your own choice |
Heating Furnace & Vacuum Chamber | l Special MoSi2 heating elements are built in a split-able furnace with thermal insulation. l Mac. working Temperature l 1300°C continuously l 1350°C for < 1 hr l The heating furnace is fixed in the vacuum-sealed chamber with a hinged type door l Working gas: All types of inert gas and oxygen gas. l Max. Vacuum level: 10-2 torr by a mechanical pump and 10-5 torr by turbopump. |
Temperature Control | l Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection. l Over-temperature protection and alarm allow for operation without attendant(s). l +/- 1 ºC temperature accuracy. l Communications Port to connect a laptop with operation software. |
Fixture for Yield Strength | l The pressure is applied to the pushing rod via heavy-duty DC motor. l Constant loading speed is driven by a step motor with 2,000N Max. force l Loading speed: 0.02 to 60 mm/ minute adjustable l Load sensor accuracy： +/- 0.2 N l The displacement sensor is built-in with +/- 1-micron accuracy. |
Control Panel | l A laptop computer will be used as a control panel with software to program working temperature and pushing rod speed l One computer will control 4 sets of the machine. l Software is included, but the Laptop computer is optional at the extra cost. l The PC will display and record the force vs displacement for each sample at a set temperature. |
Warranty | l One-year limited warranty l (Consumable parts such as heating elements, SiC die, and pushing rod are not covered by the warranty ) |
