HT 1400 Top hat furnace and bottom loading furnace have the advantage that they are highly accessible for charging. The heating from all four sides and the table provides for very uniform temperatures. The basic top hat furnaces is equipped with a fixed table under the top hat. The system can be expanded by adding one or several exchangeable tables which can be driven manually or motorically.
HT 1400 Top hat furnace and bottom loading furnace have the advantage that they are highly accessible for charging. The heating from all four sides and the table provides for very uniform temperatures. The basic top hat furnaces is equipped with a fixed table under the top hat. The system can be expanded by adding one or several exchangeable tables which can be driven manually or motorically. Another option is to remove the top hat completely with a shop crane. In such cases, the furnace heating system has a plug-in power supply.
Tmax 1280 °C
Dual shell housing with rear ventilation, provides for low shell temperatures
Top hat furnace (model LT): electro hydraulically driven top hat with fixed table
Bottom loading furnaces (model LB): driven table and fixed top hat
Five-sided heating from all four sides and from the table provides for a temperature uniformity up to +/− 10 °C according to DIN 17052-1
Heating elements mounted on support tubes provide for free radiation and long service life of the heating wire
Bottom heating protected by SiC tiles which provide for a level stacking surface
Multi-layer insulation consisting of lightweight refractory bricks backed by special insulation
Long-life ceiling design with fiber insulation
Automatic exhaust air flap on the bottom loading furnace roof
Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the top hat furnace and load
Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumina silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
Defined application within the constraints of the operating instructions
Controller with touch operation C540 (10 programs with each 20 segments).
HT 1400 Top hat furnace and bottom loading furnace have the advantage that they are highly accessible for charging. The heating from all four sides and the table provides for very uniform temperatures. The basic top hat furnaces is equipped with a fixed table under the top hat. The system can be expanded by adding one or several exchangeable tables which can be driven manually or motorically. Another option is to remove the top hat completely with a shop crane. In such cases, the furnace heating system has a plug-in power supply.
Tmax 1280 °C
Dual shell housing with rear ventilation, provides for low shell temperatures
Top hat furnace (model LT): electro hydraulically driven top hat with fixed table
Bottom loading furnaces (model LB): driven table and fixed top hat
Five-sided heating from all four sides and from the table provides for a temperature uniformity up to +/− 10 °C according to DIN 17052-1
Heating elements mounted on support tubes provide for free radiation and long service life of the heating wire
Bottom heating protected by SiC tiles which provide for a level stacking surface
Multi-layer insulation consisting of lightweight refractory bricks backed by special insulation
Long-life ceiling design with fiber insulation
Automatic exhaust air flap on the bottom loading furnace roof
Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the top hat furnace and load
Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumina silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used.
Defined application within the constraints of the operating instructions
Controller with touch operation C540 (10 programs with each 20 segments).
