This is an automatic recirculating moisture and oxygen purification system, which can provide an environment with moisture and oxygen concentration lower than 1 ppm for tube furnace and glovebox. Besides, Connect with atmosphere controlled box furnace for sintering. The purification system is an option to replace expensive multistage vacuum system with turbo pumps and achieve better oxygen-free conditions for crystal growth, CVD furnaces, and Ti alloy annealing furnace etc.
System function
Automatic cycle purification:
This system can operate automatically to purify the gas entering the glove box without frequent manual intervention, improving work efficiency.
By continuously circulating and purifying the gas, ensure that the gas inside the glove box remains in a high-purity state at all times.
Strictly control impurity content::
Controlling the content of oxygen and water below one millionth greatly reduces the impact of these two common impurities on experiments or production processes.
Low levels of oxygen and water can prevent interference from oxidation reactions, chemical reactions, and damage to sensitive materials.
Working Voltage | 220V 50/60HZ,Single Phase(110V version is available at extra cost). 1500W Max. |
Purification System | Precision oxygen sensor and humidity sensor ar built-in Automatically purging function is built-in for quick reducing O2 < 100ppm & H2O < 100 ppm before recycling. The automatic pressure control system is built in to keep the pressure at a constant level. Purification Cylinder: made of BASF antioxidant materials and UOP water adsorbent materials. Purification ratings: O2 < 1ppm & H2O < 1 ppm Moisture removal capacity: 2 kg Oxygen removal capacity: 60L Stainless steel pipe connection Flow Rate: 1-60m³/h Auto regeneration process with user-defined parameters. 6" color PLC touch panel is included which can set and display the oxygen, humidity, and pressure level Purification with a humidity sensor or oxygen sensor is possible to save the cost. Note: when oxygen reaches 1 PPM, H2O also reaches < 1 ppm for sure. choose O2 sensor only can save ~$2000 The organic solvent filter can be added upon request at the extra cost .
|
Purification Pipeline | Two 304 stainless steel KF40 ports for inert gas inlet/outlet recirculation through the filter One heavy-duty vacuum pump, 240L/m is included in this system.
|
Working gases | Working gases:Helium, Nitrogen, Argon Regeneration Gas:95% N2 + 5% H2 gas One flow meter is included for accurate gas filling
|
Net weight | 60 kg (135 lbs) |
Product Dimension | 960mm(L) x 700mm(W) x 800mm(H) (38" x 28" x 32") |
Shipping Dimension | 1100mm(L) x 815mm(W) x 1200mm(H) (44" x 32" x 47") |
Control | PLC |
Application Note | 1. Annealing Ti alloy with or without sensor to replace high-cost turbo-pump. 2. Connect to a glovebox to remove moisture for battery research at lower cost. 3. Connect to a Bridgman grower to synthesize metallic single crystal with Ar gas saving. 4. Connect with atmosphere controlled box furnace for sintering.
|
Note:All parts on the box can be customized or replaced according to customer requirements.Please consult customer service for details.
This is an automatic recirculating moisture and oxygen purification system, which can provide an environment with moisture and oxygen concentration lower than 1 ppm for tube furnace and glovebox. Besides, Connect with atmosphere controlled box furnace for sintering. The purification system is an option to replace expensive multistage vacuum system with turbo pumps and achieve better oxygen-free conditions for crystal growth, CVD furnaces, and Ti alloy annealing furnace etc.
System function
Automatic cycle purification:
This system can operate automatically to purify the gas entering the glove box without frequent manual intervention, improving work efficiency.
By continuously circulating and purifying the gas, ensure that the gas inside the glove box remains in a high-purity state at all times.
Strictly control impurity content::
Controlling the content of oxygen and water below one millionth greatly reduces the impact of these two common impurities on experiments or production processes.
Low levels of oxygen and water can prevent interference from oxidation reactions, chemical reactions, and damage to sensitive materials.
Working Voltage | 220V 50/60HZ,Single Phase(110V version is available at extra cost). 1500W Max. |
Purification System | Precision oxygen sensor and humidity sensor ar built-in Automatically purging function is built-in for quick reducing O2 < 100ppm & H2O < 100 ppm before recycling. The automatic pressure control system is built in to keep the pressure at a constant level. Purification Cylinder: made of BASF antioxidant materials and UOP water adsorbent materials. Purification ratings: O2 < 1ppm & H2O < 1 ppm Moisture removal capacity: 2 kg Oxygen removal capacity: 60L Stainless steel pipe connection Flow Rate: 1-60m³/h Auto regeneration process with user-defined parameters. 6" color PLC touch panel is included which can set and display the oxygen, humidity, and pressure level Purification with a humidity sensor or oxygen sensor is possible to save the cost. Note: when oxygen reaches 1 PPM, H2O also reaches < 1 ppm for sure. choose O2 sensor only can save ~$2000 The organic solvent filter can be added upon request at the extra cost .
|
Purification Pipeline | Two 304 stainless steel KF40 ports for inert gas inlet/outlet recirculation through the filter One heavy-duty vacuum pump, 240L/m is included in this system.
|
Working gases | Working gases:Helium, Nitrogen, Argon Regeneration Gas:95% N2 + 5% H2 gas One flow meter is included for accurate gas filling
|
Net weight | 60 kg (135 lbs) |
Product Dimension | 960mm(L) x 700mm(W) x 800mm(H) (38" x 28" x 32") |
Shipping Dimension | 1100mm(L) x 815mm(W) x 1200mm(H) (44" x 32" x 47") |
Control | PLC |
Application Note | 1. Annealing Ti alloy with or without sensor to replace high-cost turbo-pump. 2. Connect to a glovebox to remove moisture for battery research at lower cost. 3. Connect to a Bridgman grower to synthesize metallic single crystal with Ar gas saving. 4. Connect with atmosphere controlled box furnace for sintering.
|
Note:All parts on the box can be customized or replaced according to customer requirements.Please consult customer service for details.
