SPECIFICATIONS:
Input Power | l 208~240 VAC three-phase, 50/60Hz l 380V, 3 phases available upon request l Max power consumption: 8000 W l > 40A air breaker required l The power cable is included without a plug |
Melting Cylinder | l The raw material is fed into the melting cylinder via a screw rod by a servo-motor at a variable speed l Cylinder: 38CrMoAlA Nitrided steel with ID 25 mm l Screw rod Speed: 0 - 95 RPM adjustable l The melting chamber is heated by three-zone up to 300ºC with independent precision temperature control l The melting material will be fed into the extrusion head, which is heated by three heating zones up to 300ºC with independent temperature control |
Melt Extrusion Die | l The extrusion die is made of 5CrNiMo hardened steel with smooth polishing l Heating plates are fixed on the two sides of the extrusion die l Die lip width: 300 mm l Extrusion width: 270 mm adjustable l Extruded membrane thickness: 0.1 mm - 1.0 mm adjustable. l Extrusion material: PE, PEO, TPU, PP, EVA, PVC, etc. which has the melting point < 300ºC |
Rolling | l Three rollers with water cooling are used for flatting the extruded melt to form a membrane l Rollers size: 160 mm OD x 300mm L l Rollers space: adjustable manually l A recirculating water chiller with a 16 L/minute flow rate is included |
Winding Device | l The winding device is separated from melting extrusion for easy moving l Winding speed is adjustable between 0 - 60 RPM l Winding roller dimension: 75 mm Dia x 300 mm L |
Control Panel | l PLC touchscreen control panel to all parameters: l The temperature in each heating zone l Feeding speed of raw material l Rolling speed for extrusion melt l Winding speed with tension control |
Warranty | l One-year limited warranty with lifetime support (demo before purchase available) |
SPECIFICATIONS:
Input Power | l 208~240 VAC three-phase, 50/60Hz l 380V, 3 phases available upon request l Max power consumption: 8000 W l > 40A air breaker required l The power cable is included without a plug |
Melting Cylinder | l The raw material is fed into the melting cylinder via a screw rod by a servo-motor at a variable speed l Cylinder: 38CrMoAlA Nitrided steel with ID 25 mm l Screw rod Speed: 0 - 95 RPM adjustable l The melting chamber is heated by three-zone up to 300ºC with independent precision temperature control l The melting material will be fed into the extrusion head, which is heated by three heating zones up to 300ºC with independent temperature control |
Melt Extrusion Die | l The extrusion die is made of 5CrNiMo hardened steel with smooth polishing l Heating plates are fixed on the two sides of the extrusion die l Die lip width: 300 mm l Extrusion width: 270 mm adjustable l Extruded membrane thickness: 0.1 mm - 1.0 mm adjustable. l Extrusion material: PE, PEO, TPU, PP, EVA, PVC, etc. which has the melting point < 300ºC |
Rolling | l Three rollers with water cooling are used for flatting the extruded melt to form a membrane l Rollers size: 160 mm OD x 300mm L l Rollers space: adjustable manually l A recirculating water chiller with a 16 L/minute flow rate is included |
Winding Device | l The winding device is separated from melting extrusion for easy moving l Winding speed is adjustable between 0 - 60 RPM l Winding roller dimension: 75 mm Dia x 300 mm L |
Control Panel | l PLC touchscreen control panel to all parameters: l The temperature in each heating zone l Feeding speed of raw material l Rolling speed for extrusion melt l Winding speed with tension control |
Warranty | l One-year limited warranty with lifetime support (demo before purchase available) |
