GSL-1000X-20 is a 20 mm OD mini tube furnace designed for processing small samples up to 1000°Cunder a vacuum or controlled atmosphere. The stainless steel vacuum flanges with valves and quartz tubes are included for immediate use. The built-in precision temperature controller can program up to 30 segments of the heating, dwelling, and cooling steps. The furnace and controller are separatable and can be set up in vertical or horizontal positions to meet various applications such as sample heating, VLS, CVD, and gas analysis.
SPECIFICATIONS
Power ( AC110V - 55V) | Furnace input (two power inputs are required) 55VAC 110VAC or 220VAC (selectable from the option bar) 500W max. 50/60 HZ A transformer (110V or 220V - 55V) for running a single furnace under either 110V or 220VAC is included Two furnaces may be connected in series to run at 110VAC
|
Working Temperature | Max. Temperature: 1000 °C (< 1 hr) Continuous working temperature: 900°C Max. Heating Rate: 10°C /min
|
Heating Zone | |
Temperature Controller | PID automatic control and auto-tune function
30 programmable segments for precise thermal processing Built-in protection for the over-heated and broken thermocouple. Temperature Accuracy: +/- 1 °C K type thermocouple
|
Heating Elements | Fe-Cr-Al Alloy doped by Mo |
Protective Cover | A specially made protective shield is mounted on the furnace for scald protection at high temperatures (800°C+). |
Processing Tube | Fused quartz tube: 20 mm OD x 17 mm ID x 192 mm Length is included Two ceramic tube blocks are included to block heat radiation generated from the tube center For high vacuum, please choose quartz block The small crucible may be used for a tube furnace.
|
Vacuum Flange | One end is KF16 quick clamp flange is included， without valve Another end is screw tighten flange with 1/4 gas inlet You may order KF16 adaptor with valve or tube fitting by clicking the pictures below
|
Shipping Weight | 50 lbs |
Warranty | One-year limited warranty with lifetime support (Consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.) |
Compliance | CE Certified NRTL(UL61010) or CSA certification is available at extra cost. |
Application Note | The furnace is separable with a controller and easy to replace The furnace can be used a vertical position The furnace is small enough to put into the glovebox through an airlock chamber
|
GSL-1000X-20 is a 20 mm OD mini tube furnace designed for processing small samples up to 1000°Cunder a vacuum or controlled atmosphere. The stainless steel vacuum flanges with valves and quartz tubes are included for immediate use. The built-in precision temperature controller can program up to 30 segments of the heating, dwelling, and cooling steps. The furnace and controller are separatable and can be set up in vertical or horizontal positions to meet various applications such as sample heating, VLS, CVD, and gas analysis.
SPECIFICATIONS
Power ( AC110V - 55V) | Furnace input (two power inputs are required) 55VAC 110VAC or 220VAC (selectable from the option bar) 500W max. 50/60 HZ A transformer (110V or 220V - 55V) for running a single furnace under either 110V or 220VAC is included Two furnaces may be connected in series to run at 110VAC
|
Working Temperature | Max. Temperature: 1000 °C (< 1 hr) Continuous working temperature: 900°C Max. Heating Rate: 10°C /min
|
Heating Zone | |
Temperature Controller | PID automatic control and auto-tune function
30 programmable segments for precise thermal processing Built-in protection for the over-heated and broken thermocouple. Temperature Accuracy: +/- 1 °C K type thermocouple
|
Heating Elements | Fe-Cr-Al Alloy doped by Mo |
Protective Cover | A specially made protective shield is mounted on the furnace for scald protection at high temperatures (800°C+). |
Processing Tube | Fused quartz tube: 20 mm OD x 17 mm ID x 192 mm Length is included Two ceramic tube blocks are included to block heat radiation generated from the tube center For high vacuum, please choose quartz block The small crucible may be used for a tube furnace.
|
Vacuum Flange | One end is KF16 quick clamp flange is included， without valve Another end is screw tighten flange with 1/4 gas inlet You may order KF16 adaptor with valve or tube fitting by clicking the pictures below
|
Shipping Weight | 50 lbs |
Warranty | One-year limited warranty with lifetime support (Consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.) |
Compliance | CE Certified NRTL(UL61010) or CSA certification is available at extra cost. |
Application Note | The furnace is separable with a controller and easy to replace The furnace can be used a vertical position The furnace is small enough to put into the glovebox through an airlock chamber
|
