HTMF-1200-S6 electric furnace is a six sides heating muffle furnace, which is designed for annealing super-alloy and precious metal with more uniform temperature zone and SiC sheet is installed on the bottom of the chamber which can load heavy samples up to 100 kg. This high temperature muffle furnace has a higher heating rate, and reduces the downtime of heating element replacement. The electric muffle furnace is a perfect instrument for sintering and annealing large quantities of metals and ceramics. The optional refractory alloy chamber provides an economical approach to anneal samples in a controlled atmosphere, limiting cross contaminations, and especially removing binders in ceramics without contamination.
Structure | Six sides heating (left, right, front, back, top and bottom) to achieve a more uniform temperature zone. One SiC sheet is placed on the bottom of the chamber (top of the heating element) to support heavy sample load up to 100 kg. Double temperature controller to ensure furnace never overshoots Thermal-efficient ceramic (high-purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency. Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch. Built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace. |
Chamber Dimensions | 400 L × 400 W × 400 mm H Capacity：64 liters/ 4100 cubic inches/ 2.37 cubic ft |
Power | 9500 Watts Note： Power cable included but without the plug. Please install a plug by your own or click the link left the picture to choose a plug according to your country or your lab requirement |
Current Rating | 45 A |
Voltage | AC 208 - 240 Single phase, 50/50Hz |
Operating Temp Range | 100-1100°C-Max continuously 1200°C-Max under an hour Note: for using =>1000°C, the furnace block must be placed front chamber. |
Stability at 1000oC | +/- 1°C |
Uniformity at 1000oC | +/- 1°C within 250 × 250 × 250mm central zone +/- 1.5°C within 300 × 300 × 300mm central zone |
Max. Heating Rate | 20°C/ min |
Temperature Controller | YD518P temperature controller is included. Proportional–integral–derivative control (PID control) and auto-tune function 30 segments programmed with ramping, cooling, and dwelling steps Built-in over-temperature alarm and thermocouple failure alarm +/- 1 ºC temperature control accuracy Default DB9 PC communication port |
Optional +/- 0.1ºC Controller | MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW and provide +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller. |
Laptop, software & WiFi (Optional) | Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use. Labview-Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for furnaces. A wireless remote control provides up to 300 meters of operating range. The above features are available upon request at an extra cost (up to $1,000). Note: The software is only compatible with Temperature Controller |
Gas Inlet and Outlet | A 1/4'' Barbed Gas Inlet/Outlet is installed on the back of the furnace. |
Overall Dimensions | 750 L × 800 W × 1070 mm H |
Shipping Weight & Dimensions | 640 lbs 48" x 40"x 57" |
Warranty | One-year limited warranty with lifetime support. ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of One Year Limited Warranty. |
HTMF-1200-S6 electric furnace is a six sides heating muffle furnace, which is designed for annealing super-alloy and precious metal with more uniform temperature zone and SiC sheet is installed on the bottom of the chamber which can load heavy samples up to 100 kg. This high temperature muffle furnace has a higher heating rate, and reduces the downtime of heating element replacement. The electric muffle furnace is a perfect instrument for sintering and annealing large quantities of metals and ceramics. The optional refractory alloy chamber provides an economical approach to anneal samples in a controlled atmosphere, limiting cross contaminations, and especially removing binders in ceramics without contamination.
Structure | Six sides heating (left, right, front, back, top and bottom) to achieve a more uniform temperature zone. One SiC sheet is placed on the bottom of the chamber (top of the heating element) to support heavy sample load up to 100 kg. Double temperature controller to ensure furnace never overshoots Thermal-efficient ceramic (high-purity alumina fiber) insulation surrounding the chamber provides maximum energy efficiency. Heavy-duty double-layer structure with a cooling fan to keep furnace exteriors safe to touch. Built-in vent port removes undesirable contaminants and moisture; extends the life span of the heating elements and furnace. |
Chamber Dimensions | 400 L × 400 W × 400 mm H Capacity：64 liters/ 4100 cubic inches/ 2.37 cubic ft |
Power | 9500 Watts Note： Power cable included but without the plug. Please install a plug by your own or click the link left the picture to choose a plug according to your country or your lab requirement |
Current Rating | 45 A |
Voltage | AC 208 - 240 Single phase, 50/50Hz |
Operating Temp Range | 100-1100°C-Max continuously 1200°C-Max under an hour Note: for using =>1000°C, the furnace block must be placed front chamber. |
Stability at 1000oC | +/- 1°C |
Uniformity at 1000oC | +/- 1°C within 250 × 250 × 250mm central zone +/- 1.5°C within 300 × 300 × 300mm central zone |
Max. Heating Rate | 20°C/ min |
Temperature Controller | YD518P temperature controller is included. Proportional–integral–derivative control (PID control) and auto-tune function 30 segments programmed with ramping, cooling, and dwelling steps Built-in over-temperature alarm and thermocouple failure alarm +/- 1 ºC temperature control accuracy Default DB9 PC communication port |
Optional +/- 0.1ºC Controller | MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully compatible with LabVIEW and provide +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB), and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller. |
Laptop, software & WiFi (Optional) | Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) for immediate use. Labview-Based Temperature Control System (EQ-MTS01) enables users to edit temperature profiles, manage heat-treatment recipes, and record and plot data for furnaces. A wireless remote control provides up to 300 meters of operating range. The above features are available upon request at an extra cost (up to $1,000). Note: The software is only compatible with Temperature Controller |
Gas Inlet and Outlet | A 1/4'' Barbed Gas Inlet/Outlet is installed on the back of the furnace. |
Overall Dimensions | 750 L × 800 W × 1070 mm H |
Shipping Weight & Dimensions | 640 lbs 48" x 40"x 57" |
Warranty | One-year limited warranty with lifetime support. ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of One Year Limited Warranty. |
