This Crystal Growing Furnace allows lab-sized crystals to be produced with the Bridgman ,Czochralski or Stepanov method up to 1100°C. This technique is used to grow single crystals of semiconductor materials (silicon, germanium and gallium arsenide), metals, salts and synthetic gemstones.
This Crystal Growing Furnace is a compact crystal grower for both CZ and Bridgeman methods up to 1100°C. The precision pulling & rotation mechanism is built on a compact two-zone vertical tube furnace with 2" quartz tube and vacuum-sealed flange, which can pull a single crystal from a melt in the crucible via seed or move down to grow the crystal via a capillary.This technique is used to grow single crystals of semiconductor materials (silicon, germanium and gallium arsenide), metals, salts and synthetic gemstones.
Specifications
Power | l Voltage: 110V or 208-240 VAC, single phase, 50/60Hz l Furnace: 1.5 kW @ 110VAC; 2.3 kW @ 208-240VAC. Please specify working voltage before order. l Vacuum Pump: 400W (EQ-FYP-PUMP-110) l Water Chiller: 620W (KJ5000, optional) |
Vertical Tube Furnace | l Double-layer steel structure with air cooling l Split door design for easy installation of tube l 2" dia quartz tube with vacuum-sealed rotation and pulling mechanism. l Two-zone heating with 100mm L for each zone (200 mm in the total heating zone) l The Max. 1100°C working temperature l Max temperature gradient is about 10ºC/cm within 60 mm length l Precision phase-angle fired temperature control with +/- 0.1 ºC accuracy (Eurotherm controller) |
Quartz Tube and Flanges | l Quartz Tube size: 50mm OD x 44 mm ID x 600 mm L l Top flange: water-cooled flange with a needle valve and a KF25 port for rotation and pulling mechanism. l Bottom flange: flange with a needle valve and KF25 port for connection to a vacuum pump. l Two 1/4" tube fitting for gas circulation or flow. |
Pulling Mechanism | l Travel is driven by precision servo motor l Pulling Speed: 0.5 - 50 mm/h l Pulling Rod Rotation Speed: 0.1 - 23 RPM l Travel distance: 0 - 300 mm l Faster travel: 35 mm/min |
Czocharalski Method | l One 300 mm length alumina tube is put on the bottom flange to support an alumina crucible for CZ crystal pulling l One pulling rod made of tool steel is included for mounting seed crystal up to 800°C. Another pulling rod material is available upon request. l Seed crystal diameter: 0.5-3.2 mm l Alumina crucible: 25 OD×20 ID×25 H mm |
Bridgeman Method | l Two fixtures made of stainless steel are included for mounting quartz tubes. ① Half-end quartz tube: 20 OD×16 ID×150 H, mm ② Half-end quartz tube: 15 OD×11 ID×150 H, mm l Note: SS fixture may be oxidized at T > 800°C |
Temperature Control and Profile | l Two Eurotherm temperature controllers with two K-type thermocouples are builtin with +/- 0.1ºC accuracy. l 28 segments programmable with PID adjustable for two heating zone independently. l RS485 port and software (iTools) is ready for PC remote control l Note: It is the customer's responsibility to create a suitable thermal gradient for crystal growth. |
Vacuum Pump and Gas Purification System (Optional) | l 10E-2 torr via dual-stage mechanical vacuum pump l 10E-5 torr via Turbopump l The vacuum pump is optional. l For oxygen-sensitive material, suggest using a recirculating gas purification system ( H2O, O2 < 1 ppm) to replace the turbopump |
Water Chiller (Optional) | l A water chiller is required to prevent top flange overheating but it is not included in the standard package. |
Dimension & Weight | l Weight: 105 kg l Size: L×W×H: 860 mm×740 mm×2160 mm |
Shipping Weight & Dimensions | l 550 lbs, 47" x 40" x 95" l 155 lbs, 47" x 27" x 28" |
Warranty | l One-year limited warranty and lifetime technical support |
This Crystal Growing Furnace is a compact crystal grower for both CZ and Bridgeman methods up to 1100°C. The precision pulling & rotation mechanism is built on a compact two-zone vertical tube furnace with 2" quartz tube and vacuum-sealed flange, which can pull a single crystal from a melt in the crucible via seed or move down to grow the crystal via a capillary.This technique is used to grow single crystals of semiconductor materials (silicon, germanium and gallium arsenide), metals, salts and synthetic gemstones.
Specifications
Power | l Voltage: 110V or 208-240 VAC, single phase, 50/60Hz l Furnace: 1.5 kW @ 110VAC; 2.3 kW @ 208-240VAC. Please specify working voltage before order. l Vacuum Pump: 400W (EQ-FYP-PUMP-110) l Water Chiller: 620W (KJ5000, optional) |
Vertical Tube Furnace | l Double-layer steel structure with air cooling l Split door design for easy installation of tube l 2" dia quartz tube with vacuum-sealed rotation and pulling mechanism. l Two-zone heating with 100mm L for each zone (200 mm in the total heating zone) l The Max. 1100°C working temperature l Max temperature gradient is about 10ºC/cm within 60 mm length l Precision phase-angle fired temperature control with +/- 0.1 ºC accuracy (Eurotherm controller) |
Quartz Tube and Flanges | l Quartz Tube size: 50mm OD x 44 mm ID x 600 mm L l Top flange: water-cooled flange with a needle valve and a KF25 port for rotation and pulling mechanism. l Bottom flange: flange with a needle valve and KF25 port for connection to a vacuum pump. l Two 1/4" tube fitting for gas circulation or flow. |
Pulling Mechanism | l Travel is driven by precision servo motor l Pulling Speed: 0.5 - 50 mm/h l Pulling Rod Rotation Speed: 0.1 - 23 RPM l Travel distance: 0 - 300 mm l Faster travel: 35 mm/min |
Czocharalski Method | l One 300 mm length alumina tube is put on the bottom flange to support an alumina crucible for CZ crystal pulling l One pulling rod made of tool steel is included for mounting seed crystal up to 800°C. Another pulling rod material is available upon request. l Seed crystal diameter: 0.5-3.2 mm l Alumina crucible: 25 OD×20 ID×25 H mm |
Bridgeman Method | l Two fixtures made of stainless steel are included for mounting quartz tubes. ① Half-end quartz tube: 20 OD×16 ID×150 H, mm ② Half-end quartz tube: 15 OD×11 ID×150 H, mm l Note: SS fixture may be oxidized at T > 800°C |
Temperature Control and Profile | l Two Eurotherm temperature controllers with two K-type thermocouples are builtin with +/- 0.1ºC accuracy. l 28 segments programmable with PID adjustable for two heating zone independently. l RS485 port and software (iTools) is ready for PC remote control l Note: It is the customer's responsibility to create a suitable thermal gradient for crystal growth. |
Vacuum Pump and Gas Purification System (Optional) | l 10E-2 torr via dual-stage mechanical vacuum pump l 10E-5 torr via Turbopump l The vacuum pump is optional. l For oxygen-sensitive material, suggest using a recirculating gas purification system ( H2O, O2 < 1 ppm) to replace the turbopump |
Water Chiller (Optional) | l A water chiller is required to prevent top flange overheating but it is not included in the standard package. |
Dimension & Weight | l Weight: 105 kg l Size: L×W×H: 860 mm×740 mm×2160 mm |
Shipping Weight & Dimensions | l 550 lbs, 47" x 40" x 95" l 155 lbs, 47" x 27" x 28" |
Warranty | l One-year limited warranty and lifetime technical support |
