HTTF-1700 vertical tube furnace is a macro TGA tube furnace up to 1600°C function. Compared with conventional TGA devices, the TGA furnace can load larger samples up to 100 g to get a more accurate result for industry and can be operated under both vacuum and controlled gas atmosphere, even under hydrogen gas to research phase transition during material processing.
HTTF-1700 vertical tube furnace is a macro TGA tube furnace up to 1600°C function. Compared with conventional TGA devices, the TGA furnace can load larger samples up to 100 g to get a more accurate result for industry and can be operated under both vacuum and controlled gas atmosphere, even under hydrogen gas to research phase transition during material processing. The TGA furnace also may connect a gas analysis device to study gas composition change during heating and weight change.
SPECIFICATIONS of Macro TGA tube furnace with Vacuum and Atmosphere Controlled
Furnace Structure | Using one of the HT split tube furnaces with 1600oC working temperature via MoSi2 heating elements. Heating zone length 390 mm with 135 mm constant temperature zone within +/- 1℃ The temperature range is optional from 1200 to 1600 oC with +/- 0.1 accuracy Precision electronic balance with 0.001 g resolution. The vacuum level can reach 10-5 torr via turbopump |
Working Temperature | 900 ℃ - 1600 ℃ under oxygen & inert gas atmosphere ( PSIG 0.1 > 3 ) 900oC - 1500oC under vacuum |
Tube Size and Materials | High purity alumina tube with a dimension of OD60x ID54x L1200 (mm) |
Force Sensor | High precision force sensor with 0.05% accuracy Resolution: 1 mg Sample amount: 1 g minimum; 100 g maximum. (based on Fe powder) Force Sensor output data will connect to PLC or PC to show the weight change curve with temperature |
Crucibles | Five alumina crucibles are included with 36 ml capacity (OD40xID35xH40mm) Please click Pic. 1 to order more |
Temperature Controllers | Programmable temperature controller （ Europe there for precise control of heating rate, cooling rate and dwell time. Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection. Over-temperature protection and alarm allow for operation without attendant(s). +/- 0.1 ºC temperature accuracy. One K-type thermocouple. RS485 Communications Port. |
Vacuum | A KF40 vacuum port is built-in to connect a vacuum pump Achievable vacuum level depends on the selected vacuum pump Click the Picture below to order a vacuum pump separately |
Gas Delivery （optional） | 1/4" gas inlet and out are built-in with an optional mass flow controller. The recommended gas flow rate is <200 sccm. You may connect the TGA furnace with MTI multi-channel gas delivery system for mixing gas operation, or oxygen or a gas analyzer to the gas outlet port |
Warranty | One-year limited warranty (Consumable parts such as heating elements, processing tubes, and O-rings are not covered by the warranty, please order the replacement at related products below.) |
Dimension | H: 1850mm L:1450mm W: 800mm |
HTTF-1700 vertical tube furnace is a macro TGA tube furnace up to 1600°C function. Compared with conventional TGA devices, the TGA furnace can load larger samples up to 100 g to get a more accurate result for industry and can be operated under both vacuum and controlled gas atmosphere, even under hydrogen gas to research phase transition during material processing. The TGA furnace also may connect a gas analysis device to study gas composition change during heating and weight change.
SPECIFICATIONS of Macro TGA tube furnace with Vacuum and Atmosphere Controlled
Furnace Structure | Using one of the HT split tube furnaces with 1600oC working temperature via MoSi2 heating elements. Heating zone length 390 mm with 135 mm constant temperature zone within +/- 1℃ The temperature range is optional from 1200 to 1600 oC with +/- 0.1 accuracy Precision electronic balance with 0.001 g resolution. The vacuum level can reach 10-5 torr via turbopump |
Working Temperature | 900 ℃ - 1600 ℃ under oxygen & inert gas atmosphere ( PSIG 0.1 > 3 ) 900oC - 1500oC under vacuum |
Tube Size and Materials | High purity alumina tube with a dimension of OD60x ID54x L1200 (mm) |
Force Sensor | High precision force sensor with 0.05% accuracy Resolution: 1 mg Sample amount: 1 g minimum; 100 g maximum. (based on Fe powder) Force Sensor output data will connect to PLC or PC to show the weight change curve with temperature |
Crucibles | Five alumina crucibles are included with 36 ml capacity (OD40xID35xH40mm) Please click Pic. 1 to order more |
Temperature Controllers | Programmable temperature controller （ Europe there for precise control of heating rate, cooling rate and dwell time. Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection. Over-temperature protection and alarm allow for operation without attendant(s). +/- 0.1 ºC temperature accuracy. One K-type thermocouple. RS485 Communications Port. |
Vacuum | A KF40 vacuum port is built-in to connect a vacuum pump Achievable vacuum level depends on the selected vacuum pump Click the Picture below to order a vacuum pump separately |
Gas Delivery （optional） | 1/4" gas inlet and out are built-in with an optional mass flow controller. The recommended gas flow rate is <200 sccm. You may connect the TGA furnace with MTI multi-channel gas delivery system for mixing gas operation, or oxygen or a gas analyzer to the gas outlet port |
Warranty | One-year limited warranty (Consumable parts such as heating elements, processing tubes, and O-rings are not covered by the warranty, please order the replacement at related products below.) |
Dimension | H: 1850mm L:1450mm W: 800mm |
