Anti-Corrosive Rotary Tube Furnace is a three zones vacuum tube furnace designed for use with strong corrosive gases such as HCL and CH4. The processing tube is made of the double-layer structure of quartz and SS310S and the flange is made of PETF and anti-corrosive rotation fixture.
HTTF-800-III-R-AC Anti-Corrosive Rotary Tube Furnace is a three zones vacuum tube furnace designed for use with strong corrosive gases such as HCL and CH4. The processing tube is made of the double-layer structure of quartz and SS310S and the flange is made of PETF and anti-corrosive rotation fixture, which allows the rotary furnace working at max. 800oC at 3 bar pressure.
Specifications of Anti-Corrosive Rotary Tube Furnace
Furnace Construction of double layer tube furnace
- Special design processing tube with a double-layer structure, which allows furnace running HCL corrosive gas at 3 bar pressure up to 800°C.
- The sealing flanges are made of PTFE and the rotating fixture is made of anti-corrosive steel with Teflon coating.
- Three heating zone rotary furnace with max. the working temperature of 800ºC @ +/- 1oC accuracy.
Heating Zone length of vacuum tube furnace
- Three heating zones: each zone length: 150 + 300 + 150 (mm) total heating zone length 600 mm
- Constant temperature zone: 300 mm within +/- 2oC if three zones at the same temperature.
Processing tube & Sealing Flange of Anti-Corrosive Rotary Tube Furnace
- The double-layer structure which has inside quartz tube and outside SS310A high-temperature stainless steel.
Quartz tube size: 52mm ID x 60 mm OD x 1400mm L,
SS310S tube: 62 mm ID x 70mm OD x 1300 mm L
- Sealing flanges, gas fittings and valves are made of PTFE
- Anti-corrosive Magnetic Fluid Sealed Swivel Coupling
Vacuum Level:
- 10 - 2 torr by the mechanical pump
- 10 - 4 torr by a turbopump
Vacuum tube furnace main technical data
- Max. Working Temperature: 800°C for continuously and 900 °C Max for < 1 hour
- Max. working pressure 3 bars
- Max. Vacuum: 4.5x10-2 torr (<0.1mtorr/s leaking rate)
- Heating Rate Recommend: 10 °C/min
Temperature Controllers of three zone tube furnace
Three PID digital temperature controller with 30 segment programmable, +/- 1°C
Thermocouple
Three Omega K type 3mm OD x 6" L with high-temperature tolerance (220°C) connector
- Tube rotating Speed: 0 - 10 RPM variable
- Furnace tilt angle: 0~30° via the electric motor
- Power: 208 - 240V single phase (30 A Breaker required) 50/60Hz, 9 KW Max
Warranty of Anti-Corrosive Rotary Tube Furnace
One-year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.)
HTTF-800-III-R-AC Anti-Corrosive Rotary Tube Furnace is a three zones vacuum tube furnace designed for use with strong corrosive gases such as HCL and CH4. The processing tube is made of the double-layer structure of quartz and SS310S and the flange is made of PETF and anti-corrosive rotation fixture, which allows the rotary furnace working at max. 800oC at 3 bar pressure.
Specifications of Anti-Corrosive Rotary Tube Furnace
Furnace Construction of double layer tube furnace
- Special design processing tube with a double-layer structure, which allows furnace running HCL corrosive gas at 3 bar pressure up to 800°C.
- The sealing flanges are made of PTFE and the rotating fixture is made of anti-corrosive steel with Teflon coating.
- Three heating zone rotary furnace with max. the working temperature of 800ºC @ +/- 1oC accuracy.
Heating Zone length of vacuum tube furnace
- Three heating zones: each zone length: 150 + 300 + 150 (mm) total heating zone length 600 mm
- Constant temperature zone: 300 mm within +/- 2oC if three zones at the same temperature.
Processing tube & Sealing Flange of Anti-Corrosive Rotary Tube Furnace
- The double-layer structure which has inside quartz tube and outside SS310A high-temperature stainless steel.
Quartz tube size: 52mm ID x 60 mm OD x 1400mm L,
SS310S tube: 62 mm ID x 70mm OD x 1300 mm L
- Sealing flanges, gas fittings and valves are made of PTFE
- Anti-corrosive Magnetic Fluid Sealed Swivel Coupling
Vacuum Level:
- 10 - 2 torr by the mechanical pump
- 10 - 4 torr by a turbopump
Vacuum tube furnace main technical data
- Max. Working Temperature: 800°C for continuously and 900 °C Max for < 1 hour
- Max. working pressure 3 bars
- Max. Vacuum: 4.5x10-2 torr (<0.1mtorr/s leaking rate)
- Heating Rate Recommend: 10 °C/min
Temperature Controllers of three zone tube furnace
Three PID digital temperature controller with 30 segment programmable, +/- 1°C
Thermocouple
Three Omega K type 3mm OD x 6" L with high-temperature tolerance (220°C) connector
- Tube rotating Speed: 0 - 10 RPM variable
- Furnace tilt angle: 0~30° via the electric motor
- Power: 208 - 240V single phase (30 A Breaker required) 50/60Hz, 9 KW Max
Warranty of Anti-Corrosive Rotary Tube Furnace
One-year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.)
