HT-350C is an experimental melt coating system equipped with a heated slot-die coating head. The heads can reach a maximum heating temperature of 350°C for producing polymer or polymer composite films, such as plastic films, and flexible electrolyte membranes for solid-state batteries. It can also be used for coating metal lithium films on copper foil inside a glovebox.
Pledge: genuine guarantee,speed refund,gift insurance,seven days no reason to return
Specifications:
Power Supply | l 208-240V, 50/60Hz, (single phase) |
Power Consumption | l 3.2kW |
Heated Coating Heads | l Up to 350℃ Heatable Slot-die Coating l 150mm width l ±2um coating thickness uniformity |
Heating Chamber | l Material: Stainless Steel SS316 l Dimensions: ID54mm × height 230mm l Volume: ~500ml l Maximum Heating Temperature: 500°C（Via external heating coil) l Temperature Control Accuracy: ±1°C l Maximum Pressure: 2MPa. |
Heated Slot Die and Heating plate | l One 150 mm width heated slot-die head is connected to the heating container ① Cooling plate is available upon request with water chiller from 5°C - 35°C l One 200 x 200 mm heating plate with max. 200°C is located at the bottom of the slot die l The gap between the slot die and the heating plate is adjustable via two-micrometer heads |
Roll-to-Roll System | l Maximum Width: 200mm l Speed Control Range: 0~800mm/min l 24V DC motor, suitable for use in an Ar environment inside a glovebox l Equipped with a 110 - 240 VAC to 24 VDC power adapter |
Control Unit | l The control unit with 7" touchscreen is separated from the device, which will control ① Container temperature and pressure ② Heated plate temperature ③ Roll-to-roll speed |
Dimensions | l 1500mm (L) x 470 mm (W) x 600 mm (H) |
Weight | l ~100kg |
Warranty | l One Year limited warranty with lifetime support l Rusting and damage due to improper storage condition or maintenance are not covered by warranty |
Specifications:
Power Supply | l 208-240V, 50/60Hz, (single phase) |
Power Consumption | l 3.2kW |
Heated Coating Heads | l Up to 350℃ Heatable Slot-die Coating l 150mm width l ±2um coating thickness uniformity |
Heating Chamber | l Material: Stainless Steel SS316 l Dimensions: ID54mm × height 230mm l Volume: ~500ml l Maximum Heating Temperature: 500°C（Via external heating coil) l Temperature Control Accuracy: ±1°C l Maximum Pressure: 2MPa. |
Heated Slot Die and Heating plate | l One 150 mm width heated slot-die head is connected to the heating container ① Cooling plate is available upon request with water chiller from 5°C - 35°C l One 200 x 200 mm heating plate with max. 200°C is located at the bottom of the slot die l The gap between the slot die and the heating plate is adjustable via two-micrometer heads |
Roll-to-Roll System | l Maximum Width: 200mm l Speed Control Range: 0~800mm/min l 24V DC motor, suitable for use in an Ar environment inside a glovebox l Equipped with a 110 - 240 VAC to 24 VDC power adapter |
Control Unit | l The control unit with 7" touchscreen is separated from the device, which will control ① Container temperature and pressure ② Heated plate temperature ③ Roll-to-roll speed |
Dimensions | l 1500mm (L) x 470 mm (W) x 600 mm (H) |
Weight | l ~100kg |
Warranty | l One Year limited warranty with lifetime support l Rusting and damage due to improper storage condition or maintenance are not covered by warranty |
