THE Furnace is a four channels 80 mm O.D. ( 3"ID) tube furnace for high throughput heat treatment of alloy and ceramic material up to 1200°C. Touch screen controller to set up temperature profile for each channel at ease. It is an excellent tool to research the phase diagram of new generation material in compact space
SPECIFICATIONS:
| Furnace Structure | The furnace is consistent with six-tube furnace modules with quartz tube 80 OD x 75 ID x 500 L, mm Each heating module's temperature is controlled independently up to 1200°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to use under vacuum or flowing gas Processing six batches of samples with the different temperatures in a compact space
|
| Heating | Heating Element: Ni-Cr-Al- resistance wire Heating zone Length： 300 mm Constant temperature zone: ~ 100 mm within +/- 1oC
|
| Working Temperature | Max.Working Temperature: 1200° C < 1 hrs Continuous working temperature: 1200° C Heating rate: 20 °C/ min Max. Temperature accuracy: +/- 1.0 °C
|
Processing Tube &
Vacuum Flange & Flange | 4 quartz tubes with Φ80 X 75 ID x L 500 mm, are included 4 flowmeters are included KF25 vacuum port is built-in to connect the vacuum pump 4 Needle valves for vacuum open or close for each channel and 4 needle valve with 1/4 NPS fitting for gas outlet 4 Needle valves with 1.4 1/4" NPS fittings for gas outlet or vacuum are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump is required via a KF25 port.
|
| Temperature Control | Touch screen temperature control pane to control 4 channel temperature independently Includes over-temperature and broken thermal couple alert. 4 channel heating tube is controlled independently by 24 segments programmable
4 K type Thermal Couples are included Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heaters by one Laptop.
|
| Power & Working Voltage | 10 KW, 208 - 240V single phase, 50/60Hz Total 6 KW max. Note： Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
|
| Compliance | |
| Warranty | One year limited warranty with lifetime support We reserve the right to upgrade the furnace structure for better performance without notice |
Warning &
Application note | Max pressure of this furnace is 7.5 PSI （0.5 atm). You must install a pressure regulator on your gas tank to avoid being over-pressured This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.
|
THE Furnace is a four channels 80 mm O.D. ( 3"ID) tube furnace for high throughput heat treatment of alloy and ceramic material up to 1200°C. Touch screen controller to set up temperature profile for each channel at ease. It is an excellent tool to research the phase diagram of new generation material in compact space
SPECIFICATIONS:
| Furnace Structure | The furnace is consistent with six-tube furnace modules with quartz tube 80 OD x 75 ID x 500 L, mm Each heating module's temperature is controlled independently up to 1200°C Quickly sealed flange, Vacuum gauge, and flowmeter are installed to use under vacuum or flowing gas Processing six batches of samples with the different temperatures in a compact space
|
| Heating | Heating Element: Ni-Cr-Al- resistance wire Heating zone Length： 300 mm Constant temperature zone: ~ 100 mm within +/- 1oC
|
| Working Temperature | Max.Working Temperature: 1200° C < 1 hrs Continuous working temperature: 1200° C Heating rate: 20 °C/ min Max. Temperature accuracy: +/- 1.0 °C
|
Processing Tube &
Vacuum Flange & Flange | 4 quartz tubes with Φ80 X 75 ID x L 500 mm, are included 4 flowmeters are included KF25 vacuum port is built-in to connect the vacuum pump 4 Needle valves for vacuum open or close for each channel and 4 needle valve with 1/4 NPS fitting for gas outlet 4 Needle valves with 1.4 1/4" NPS fittings for gas outlet or vacuum are included The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves Max. Vacuum 10^-5 torr by a turbopump Only one vacuum pump is required via a KF25 port.
|
| Temperature Control | Touch screen temperature control pane to control 4 channel temperature independently Includes over-temperature and broken thermal couple alert. 4 channel heating tube is controlled independently by 24 segments programmable
4 K type Thermal Couples are included Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heaters by one Laptop.
|
| Power & Working Voltage | 10 KW, 208 - 240V single phase, 50/60Hz Total 6 KW max. Note： Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
|
| Compliance | |
| Warranty | One year limited warranty with lifetime support We reserve the right to upgrade the furnace structure for better performance without notice |
Warning &
Application note | Max pressure of this furnace is 7.5 PSI （0.5 atm). You must install a pressure regulator on your gas tank to avoid being over-pressured This furnace also can be modified as a larger CVD furnace system with a proper gas delivery system. Please contact us to discuss your special application.
|
